UNIVERSAL TESTER TYPE EH-P/06/10.01
The EH-P/06/10.01 universal tester with
TSTx expansion modules is designed to test the correct operation of components.
KEY FEATURES
easy testing of production devices
possibility of using expansion modules
high safety class
possibility of customizing the device according to the customer’s design
SELECTED technical data
3
number of analog channels
0 to 10 V (resolution 1 mV)
output voltage range
< 30 W
power consumption
from 5 °C to +40 °C
operating temperature
222 x 234 x 110 mm
external dimensions
IP20
degree of protection
Technical
specifications
DESCRIPTION
Universal tester type EH-P/06/10.01
The EH-P/06/10 universal tester is designed to test the correct operation of components manufactured by Elgór + Hansen S.A. It enables, among other things, the generation of test signals, measurement of the response time of individual components of overcurrent relays, simulation of measurement circuit faults, change of relay settings, and basic diagnostics. The EH-P/10 universal tester is equipped with two RS-485 interfaces operating at one of the following speeds: 9600 bps, 19200 bps, 57600 bps, 115200 bps, and an I2C interface enabling the tester to work with expansion modules that extend its functionality.
The device is also equipped with a universal USB-RS-485 converter. Optionally, the tester can be connected to a PC. With the appropriate software, this allows for automation of the performed operations.
TECHNICAL DATA
Analog channels
| Number of channels | 3 |
| Output voltage range | 0 ÷ 10 V (resolution 1 mV) |
| Maximum relative voltage error | 3 % |
Dual status inputs
| Number of channels | 8 |
| Guaranteed activation voltage | ≥ 3V DC |
| Maximum permissible voltage | 13 V DC |
Contact outputs
| Number of channels | 8 |
| Maximum switching voltage | 250 V AC, 220 V DC |
| Maximum switchable current | 2 A |
| Maximum switchable power | 62,5 VA, 60 W |
| Rated load | 0.5 A at 125 V AC |
Other parameters
| Reference voltage source | 10000 mV DC ± 0,2 % (at I ≤ 1 mA) |
| Maximum relative error in measuring the response time of the tested component | 2 % |
| Rated supply voltage | 230 V ± 1 %* AC 50 Hz |
| Power consumption | < 30 W |
| Operating temperature | from 5 °C to+40 °C |
| Air humidity | max. 95% at a temperature of 40 °C |
| External dimensions | 222 x 234 x 110 mm |
| Degree of protection | IP20 |
| Weight | about 1.8 kg |
* It is possible to power the tester with 230 V ± 10 %, but this does not guarantee that the minimum and maximum voltage levels (power supply to the tested relays) will be maintained.
Block diagram
Dimensional drawing
EXPANSION MODULES
The standard equipment of the EH-P/06/10.01 universal tester includes the TST1 expansion module. It is also possible to equip the tester with additional expansion modules, allowing it to work with other E+H components.
List of available expansion modules for the EH-P/06/10.01 universal tester.
| Extension module name | Type | Supported devices |
| TST1 expansion module | – | Calibration and testing of relays of the following types:
LH 86/2.1 (“digital version”), LH 86/2.2 (“digital version”), EH-P/13/03, |
| TST2 expansion module | EH-P/06/10.02 | Calibration and testing of integrated safety controllers such as:
EH-P/15/01.01, |
| TST3 expansion module | EH-P/06/10.03 | Calibration and testing of safety devices such as:
EH-P/02/01.01, |
| TST4 expansion module | EH-P/06/10.04 | Group security testing:
EH-CxxK EH-P/02/12.01, |
| TST5 expansion module | EH-P/06/10.05 | Calibration and testing of EH-P/23/02.02 intrinsically safe analog input modules. |
| TST6 expansion module | EH-P/06/10.06 | Testing of integrated security controllers such as:
EH-P/15/01.01, |
| TST8 expansion module | EH-P/06/10.08 | Testing of integrated security controllers of the following types:
EH-P/15/02.01 |
